Spirax Sarco 67200 S4A Steam Separator

Moisture Separators are used to improve the quality of steam or compressed air either within the distribution system or on the supply inlet to equipment. Removal of moisture is by a series of baffles on which the suspended water droplets impinge and fall out by gravity to the drain, which must be piped to a trap.

Spirax Sarco Steam Separator, 4 in Flanged Nominal, 150 psi Operating, -20 to 650 deg F Operating, 29 in W Face to Face, Media: Steam, Steel, 31.2 in H

• Separators designed to gather small water droplets from steam and separate them from the pipe flow
• Reduce wet steam
• Maintain heat transfer efficiency
• Reduce erosion and corrosion in your steam system
• Reduce pipework and heating surface scaling
• -20 deg F to 650 deg F Maximum allowable working temperature

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Spirax_S4A_4_Manual.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Spirax_Sarco_67176_Specification_Sheet.pdf