Dixon® RDM11 Hose Mender, 1 in, Hose Shank, 316 Stainless Steel
- Manufacturer: Dixon Valve & Coupling
- Brand Name: Dixon Valve & Coupling
- Part#: 257260
- MPN: RDM11
- UPC: 089109833818
- Min. Order Qty: 1
- Qty. Interval: 1
-
Availability:
- Branch Availability
-
Price:
- Add To Favorites
Dixon® Hose Mender, Fitting/Connector Type: Coupling, 1 in Nominal, Hose Shank End Style, 4-1/32 in Length, 316 Stainless Steel, 1-1/32 in Dia
| Dimensions | : | 1-1/32 in Dia |
| End Style | : | Hose Shank |
| Fitting/Connector Type | : | Coupling |
| Length | : | 4-1/32 in |
| Material | : | 316 Stainless Steel |
| Nominal Size | : | 1 in |
- Mender for connecting two hoses of the same diameter in a straight run
- Hose barbs on both ends
- 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel
- Barbed fitting for a tight seal on hoses
- For use with a hose clamps or crimp sleeve or ferrule
- Menders are not for compressible products such as air, nitrogen or steam
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
Catalog
VIDEO LINK