3M™ 7100172099 QCI In-Line Shearbolt Connector, 1/0 AWG to 350 kcmil Conductor Aluminum/Copper Conductor

3M™ mechanical shearbolt connectors, QCI series are designed to cover a wide range of conductor sizes from 2 AWG to 1250 kcmil. This shearbolt connector design provides excellent performance and features not found in many other shearbolt connectors. No dies are needed for installation: following cable preparation, simply slide the connector over the conductor and tighten the bolts until they shear. The QCI connectors are designed to connect either aluminum and/or copper conductors.

CASE OF 3 3M 7100172099 SHEARBOLT CONNECTOR QCI 1/0-350 1/0 AWG-350 KCMIL

• Greater contact force versus standard shear bolt connectors
• Contact disk (friction plate) on the bolt end prevents damage to the conductor, providing increased contact force and will not damage fine strand conductors
• Sized for american wire gauge conductors
• 0.78 inchside diameter
• Built-in center stop enables correct positioning
• Made of aluminum for good conductivity and has corrosion-resistant tin plating
• Withstands a maximum temperature of 221 deg f (105 deg c)
• Stepless shearbolt barrel and contact pad ensures optimun contract pressure for reliable performance and mechanical pull-out strength
• Accommodates wire size of 1/0 awg to 350 kcmil (stranded)

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_QCI_4_0_600_Catalog.pdf
• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_QCI_4_0_600_Installation_Instructions.pdf