3M™ 7000045737 Premium Mode and Tooling Compound, 1 gal Container, Solvent Odor/Scent, Red, Paste Form

3M™ premium mold and tooling compound aggressively removes sanding scratches in tooling gelcoat (P600 or finer discs P1000 or finer 3M™ Wetordry™ sheets), reducing sanding and compounding time while saving time and money for marine boatyards. Eliminate sanding scratches 3M™ premium mold and tooling compound rids boats of those annoying scratches that result from sanding. Our mold and tooling compound cuts quickly and leaves a fine finish that is easily polished to a high gloss. We recommend following up with 3M™ Finesse-it™ II finishing material (PN 09048)for a clean high gloss finish. Special formula for tooling gel coats. We recommend this compound for tooling gelcoats which have different properties than regular gelcoats. A tooling gelcoat is typically harder than regular gelcoat and therefore is often used for applications where no flexing will occur. Tooling gelcoats are ideal for molds that will not flex but will be polished to a high luster. To eliminate the fine scratches that come from sanding, we turned to science. We formulated a compound that works with the hard surface of a tooling gelcoat resulting in a smooth surface that can be polished to a mirror like high gloss.

3M™, 7000045737, Premium Mode and Tooling Compound, 1 gal Container, Paste Form, Red, Solvent Odor/Scent, >7 pH, 82 g/L VOC, Composition: Tripoli (CrystalLine Silica), Aluminum Oxide, Water, White Mineral Oil (Petroleum, Polyethylene Glycol, Hydrotreated Light Petroleum Distillate, Ethoxylated Lauryl Alcohol, Stearic Acid, 1.24 to 1.32 Specific Gravity

• Aggressive properties cut quickly to save time
• Finish may be polished to a high gloss
• Compounding produces a smooth surface
• Economical compound removes sanding scratches in tooling gelcoat
• Tooling compound works great on hard surfaces

• SDS https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Finesse_it_051131_06027_SDS.pdf